•CDMA 450 F-Band RF SAW Filter
•3.8 x 3.8 x 1.4 mm Surface-mount Package•Complies with Directive 2002/95/EC (RoHS)
PbValue+2730-40 to +85
260°C for 30 s
462.5 MHzSAW Filter
UnitsdBmVDC°C
Absolute Maximum RatingsRatingMaximum Incident Power in Passband
Maximum DC Voltage between any Two TerminalsStorage Temperature Range
Suitable for Lead-free Soldering - Maximum Soldering Profile
SM3838-6Electrical Characteristics Characteristic
Nominal 1 dB Center Frequency
Passband Insertion Loss 460.0 to 464.8 MHzVSWRRejection
460.0 to 464.8 MHz0.3 to 450.0 MHz450.0 to 455.0 MHz485.0 to 505.0 MHz505.0 to 1200 MHz1200 to 2000 MHz
Operating Temperature RangeImpedance at fc
Source, single endedLoad, single ended
Case Style
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicatorStandard Reel Quantity Reel Size 7 Inch Reel Size 13 Inch
TA
11, 2, 3
4035403020-30
50 ohm50 ohm
SM3838-6 3.8 x 3.8 mm Nominal Footprint
642, YWWS1000 Pieces/Reel3000 Pieces/Reel
Sym
fC
IL
Notes
1
MinTyp
462.52.81.9:14546504132
Max
3.52.4:1
Units
MHzdB
dB
+80°C
Electrical Connections
ConnectionPort 1Port 2Case Ground
Terminals
25All others
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.Notes:
1.2.3.
Unless noted otherwise, all specifications apply over the operating temper-ature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer.Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details.
\"LRIP\" or \"L\" after the part number indicates \"low rate initial production\"
5.6.
and \"ENG\" or \"E\" indicates \"engineering prototypes.\"
The design, manufacturing process, and specifications of this filter are subject to change.
Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design.
US and international patents may apply.
RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
4.
7.8.
www.RFM.com E-mail: info@rfm.com©2008 by RF Monolithics, Inc.Page 1 of 5
SF1213D - 12/12/08
http://oneic.com/
Passband Plot
Wideband Plot
www.RFM.com E-mail: info@rfm.com©2008 by RF Monolithics, Inc.Page 2 of 5
SF1213D - 12/12/08
http://oneic.com/
VSWR
S11 and S22 Plots
www.RFM.com E-mail: info@rfm.com©2008 by RF Monolithics, Inc.Page 3 of 5
SF1213D - 12/12/08
http://oneic.com/
Tape and Reel Specifications
“B “
Nominal Size
100 REF.\"B\" REF.Quantity Per Reel
Inches
713
millimeters
178330
10003000
See Detail \"A\"12.013.020.22.0COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
AoBoKoPitchW
4.25 mm4.25 mm1.30 mm8.0 mm
12.0mm
0.3 ± 0.052.04.01.501.755.5PIN #1ARO.3(MAX.)12.0BoBAoKoBPitchAR0.5(MAX.)1.5SECTION A-ASECTION B-BUSER DIRECTION OF FEEDwww.RFM.com E-mail: info@rfm.com©2008 by RF Monolithics, Inc.Page 4 of 5
SF1213D - 12/12/08
http://oneic.com/
SM3838-6 Case
6-Terminal Ceramic Surface-Mount Case
3.8 X 3.8 mm Nominal Footprint
Case Dimensions
Dimension
Min
ABCDEGHIJ
3.603.601.300.952.390.901.900.501.70
mmNom
3.803.801.501.102.541.02.00.61.8
Inches
Max
4.04.01.701.252.691.102.100.701.90
Min
0.140.140.050.0370.0900.0350.750.0200.067
Nom
0.150.150.060.0430.100.040.080.0240.07
Max
0.160.160.0670.050.1100.0430.830.0280.075
0.036(0.91)0.029 TYP.(0.74)0.050 TYP.(1.27)0.176 REF.(4.47)Electrical ConnectionsConnection
Port 1Port 2
Single Ended InputSingle Ended OutputGround
0.129 REF.(3.28)Terminals
25All others
0.066(1.68)0.055 TYP.(1.40)Single Ended Operation OnlyDot indicates Pin 1
Materials
Solder Pad Ter-Au plating 30 - 60 µinches (76.2-152 µm) over 80-200 minationµinches (203-508 µm) Ni.LidBodyPb Free
Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phospho-rus) 100-200 µinches ThickAl2O3 Ceramic
PCB Footprint
TOP VIEW BOTTOM VIEW
B1661CGH 642 YWWSA25E52I44DJ33www.RFM.com E-mail: info@rfm.com©2008 by RF Monolithics, Inc.Page 5 of 5
SF1213D - 12/12/08
http://oneic.com/
分销商库存信息:
RFMSF1213D
因篇幅问题不能全部显示，请点此查看更多更全内容